Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Trusted Storm & Disaster Restoration for Long Island City Homeowners
Our Storm & Disaster Restoration cost guide shows Long Island City jobs typically run $2,800-$12,500 depending on damage severity, with emergency board-up and roof tarping starting at $450-$1,200. Most Long Island City homeowners see our crew on-site within 60-90 minutes of calling, and every job starts with a written price before any work begins. Call (914) 530-9723 for a documented assessment.
We’ve restored 12,000+ homes since 2011, every one with a written price before work started and a photo record when the crew left. Alicia Brennan founded Back to Dry after working as a claims adjuster and watching homeowners lose their claims to sloppy documentation. In Long Island City, we regularly see storm damage concentrated in the low-lying blocks near the East River waterfront and the industrial zones south of Queensboro Plaza, where wind-driven rain penetrates flat-roofed warehouses converted to residential lofts. Our crews carry Dri-Eaz and Phoenix drying systems on every truck, and we document every moisture reading to IICRC, RIA, and IFA standards. The Haven Standard, Clause 1, requires a written price before work begins on every job, no exceptions.
What Our Storm & Disaster Restoration Service Includes
Storm Damage Cleanup
Storm damage cleanup addresses the immediate aftermath of severe weather: water intrusion, structural compromise, and hazardous debris. In Long Island City, we see this most often after nor’easters push Atlantic moisture across Queens, saturating the flat roofs common in Hunters Point and the Anable Basin area. Our crew arrives with moisture meters, thermal imaging, and containment barriers to stop secondary damage while documenting every affected square foot for your adjuster.

Flood Damage Restoration
Flood damage restoration removes standing water, dries structural materials, and prevents mold colonization in the 72-hour window before spores establish. Long Island City’s combined sewer system backs up during heavy rainfall, particularly in the basement units near 21st Street and the Sunnyside Yards drainage basin. We extract water with truck-mounted systems, then deploy Injectidry cavity drying and Phoenix dehumidifiers to reach the vapor pressure differential needed for complete drying, documented with daily psychrometric logs.

Emergency Board-Up
Emergency board-up secures broken windows, doors, and compromised walls to prevent theft, weather intrusion, and liability exposure. After the microburst that struck western Queens in July 2023, we boarded 34 properties in Long Island City within four hours, using pressure-treated plywood and tamper-evident fasteners. Every board-up includes a photo record of the pre-existing damage, a written scope for permanent repairs, and a price before we start, per Haven Standard, Clause 1.

Roof Tarping
Roof tarping provides temporary weather protection when shingles, membrane, or flashing fail during a storm. Flat and low-slope roofs in Long Island City’s converted industrial buildings are particularly vulnerable to wind uplift at parapet walls and mechanical penetrations. We use reinforced polyethylene tarps with perimeter batten strips, not sandbags that shift in wind, and we photograph the roof condition before covering to establish the pre-tarp damage baseline your insurer needs.

Debris Removal
Debris removal clears fallen trees, construction materials, and contaminated household items that storms deposit inside or around your property. In Long Island City, we regularly haul debris from the narrow alleyways and zero-lot-line buildings near Vernon Boulevard where standard waste haulers cannot access. Our crew separates hazardous from non-hazardous materials on-site, documents the debris inventory with photos, and provides the waste manifest your claim requires.

Wind Damage Repair
Wind damage repair restores siding, roofing, windows, and structural elements after sustained gusts or sudden microbursts. The East River corridor funnels wind into Long Island City at velocities 15-20% higher than inland Queens, which we’ve measured anemometrically during storm events. We assess structural integrity with moisture mapping and resistance testing, then deliver a written repair scope with line-item pricing before any reconstruction begins.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Storm & Disaster Restoration

We’ve deployed Dri-Eaz dehumidification systems on hundreds of Long Island City jobs since 2011, from the high-rise conversions near Court Square to the brick rowhouses south of Broadway. Dri-Eaz’s LGR technology pulls moisture at low grain temperatures, which matters in Queens basements that rarely exceed 65°F even in summer, and we stock replacement filters and condensate pumps to keep units running through multi-week drying projects.
Phoenix axial air movers are our standard for structural drying in dense urban environments where space is limited and airflow must be directed precisely. We’ve used Phoenix systems to dry plaster-and-lath walls in pre-war Long Island City buildings where cavity drying would otherwise require demolition. Whether your property has Dri-Eaz, Phoenix, or any other equipment already in place from emergency services, we can assess its performance, document the readings, and supplement or replace as needed to meet drying standards.
Before
AfterSigns You Need Storm & Disaster Restoration Right Now
- Visible water staining on ceilings or walls - Water stains that appear or expand during or after a storm indicate active intrusion through roofing, flashing, or facade failures. In Long Island City’s converted industrial buildings, we’ve found that stains near column lines often track to parapet cap failures that channel water across multiple units before visible dripping begins.
- Sagging or bubbling drywall - When gypsum board absorbs enough water, the paper facing delaminates and the core loses structural integrity. This typically occurs 24-48 hours after initial saturation, and in Long Island City’s tightly packed multi-family buildings, it can mean water has migrated through shared walls into adjacent units.
- Musty odors that intensify after rainfall - A sharp increase in moldy smell when it rains points to hidden moisture reservoirs in wall cavities, subfloors, or mechanical chases. We trace these with thermal imaging and borescopic inspection, then document the moisture content percentage in each affected material.
- Granules from asphalt shingles collecting in gutters or at downspouts - Excessive granule loss means your roof’s weather-resistant surface is degrading, often from wind scouring or hail impact. In Long Island City, we’ve documented this pattern after storms that tracked up the East River, with damage concentrated on north- and west-facing roof slopes.
- Windows or doors that no longer close properly - Structural shifting from wind pressure or waterlogged framing can warp openings enough to create visible gaps. This compromises both weather protection and security, and in Long Island City’s high-rise buildings, pressure differentials during storms can accelerate the distortion.
Our Storm & Disaster Restoration Process - Step by Step

- 1
Emergency contact and dispatch. A live person answers your call to (914) 530-9723, 24 hours a day, 7 days a week, no voicemail trees. We gather your location, the storm type, and visible damage, then dispatch the nearest crew with appropriate equipment. Typical arrival in Long Island City is 60-90 minutes.
- 2
On-site damage assessment and documentation. Our technicians photograph every affected area before touching anything, record moisture readings with calibrated pin and pinless meters, and identify material classifications by trade name (gypsum, lath and plaster, engineered wood, etc.). You receive a written scope and price before work begins, per Haven Standard, Clause 1.
- 3
Emergency mitigation and stabilization. We perform board-up, roof tarping, water extraction, or debris removal as needed to stop ongoing damage. Every action is photo-documented, and drying equipment is deployed with initial psychrometric readings logged to establish the drying baseline.
- 4
Structural drying and monitoring. Daily visits record moisture content, relative humidity, temperature, and vapor pressure differential until materials reach the dry standard defined by IICRC S500. These logs become part of your claim documentation, showing insurers exactly when and how drying was achieved.
- 5
Final inspection and warranty delivery. We conduct a walkthrough with you, review the complete photo record and drying logs, and deliver the 365-Day Done Right Promise under The Haven Standard. If anything isn’t done right, we make it right.
How Much Does Storm & Disaster Restoration Cost in Long Island City?
A typical emergency board-up or roof tarping in Long Island City runs $450-$1,200 depending on access difficulty and the linear footage of openings to secure. Flood damage restoration with extraction and structural drying starts around $2,800 for a contained basement or single room, scaling to $8,500-$12,500 for whole-floor saturation in a multi-unit building with cavity drying requirements. Wind damage repair with siding or roofing replacement typically falls between $3,200 and $9,000, varying with material type and whether structural elements require reinforcement.
Several factors move these ranges. The age of your building affects material accessibility: pre-war plaster and lath in Long Island City’s industrial conversions often requires more invasive drying than modern drywall. The height of the water line determines how much insulation, flooring, and base trim must be removed. Shared walls in rowhouse or loft buildings extend drying time because moisture migrates laterally into adjacent units. And the density of Long Island City’s streets affects equipment staging and debris hauling logistics.
To avoid overpaying, get any competitor’s estimate in writing and bring it to us for a Free Second Opinion at no charge. We itemize every line in our scopes, so you can compare material quantities, labor hours, and equipment days directly. Our written price includes all documentation, photo records, and the 365-Day Done Right Promise, with no scope-creep additions once the crew is inside, per Haven Standard, Clause 1.
Storm & Disaster Restoration Near Long Island City - Our Service Area

We maintain crews positioned for rapid response across western Queens and adjacent neighborhoods. From our base near Long Island City, we typically reach Storm & Disaster Restoration in Astoria in 30-45 minutes, Storm & Disaster Restoration in Greenpoint in 25-40 minutes, and Storm & Disaster Restoration in Murray Hill in 45-60 minutes depending on Queensboro Bridge traffic. We also serve home damage restoration across Williamsburg, Elmhurst, the Upper East Side, Midtown Manhattan, the Upper West Side, the Financial District, and Hoboken. If you’re unsure whether your address falls within our dispatch radius, call (914) 530-9723 and we’ll confirm arrival time before you commit.
Serving Long Island City, NY - Our Local Coverage Area
We’re based in the Long Island City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Storm & Disaster Restoration in Long Island City

Storm and disaster restoration is the professional process of returning a property to its pre-loss condition after severe weather events, including water extraction, structural drying, debris removal, temporary weather protection, and reconstruction. For Storm & Disaster Restoration in Long Island City, this often means addressing wind-driven rain in converted industrial lofts, combined sewer backup in basement units, and facade damage from East River wind exposure. Every job we perform includes a written price before work begins, photo documentation on every visit, and drying logs to IICRC standards. Call (914) 530-9723 for a documented assessment.
Emergency mitigation like board-up and water extraction typically completes in 2-6 hours, while structural drying requires 3-7 days depending on material saturation and building configuration. Full reconstruction after major storm damage in Long Island City’s dense multi-unit buildings can extend to 4-12 weeks, particularly when coordinating with condo associations or historic preservation requirements. We provide a written timeline with your scope, updated daily with moisture log data. Call (914) 530-9723 for a schedule estimate specific to your property.
Most storm restoration projects in Long Island City range from $2,800 for contained water damage to $12,500 for extensive flooding with structural drying, with emergency services like board-up starting at $450-$1,200. The final price depends on affected square footage, material types, equipment days required, and whether multiple units are involved. We deliver a written, itemized price before any work begins, per Haven Standard, Clause 1, and offer a Free Second Opinion on any competitor’s written estimate. Call (914) 530-9723 for your specific quote.
Yes, we deploy and service Dri-Eaz and Phoenix drying systems on every Long Island City job, and we can assess equipment already placed by emergency services or other contractors. Our technicians are trained to read and interpret the psychrometric data these units generate, and we maintain stock of replacement filters, hoses, and condensate pumps to prevent downtime during critical drying periods. Whether you have Dri-Eaz, Phoenix, or any other make, we can help.
Yes, a live person answers every call to (914) 530-9723, 24 hours a day, 7 days a week, with no voicemail trees or next-business-day callbacks while water is still moving. Our typical on-site arrival in Long Island City is 60-90 minutes, and we carry emergency board-up materials, extraction equipment, and temporary roofing supplies on every truck. The crew that arrives will be background-checked, uniformed, and licensed, with documentation ready for your insurer from the first photo.
Every storm restoration job carries the 365-Day Done Right Promise under The Haven Standard: if it’s not done right, we make it right. This is a signed guarantee, not a marketing line, and it covers both our workmanship and the performance of drying and reconstruction. If moisture readings rise or repaired materials fail within 365 days, we return at no charge to diagnose and correct the issue, with the same photo documentation and written scope as the original job.
Ensure safe access to the damaged areas, turn off electrical power to wet sections if you can do so safely from a dry location, and gather your insurance policy number and adjuster contact if available. Do not enter rooms with sagging ceilings, standing water over electrical outlets, or visible structural compromise, these are hazards for trained professionals with proper PPE and testing equipment. We’ll handle documentation, temporary power, and safety protocols when we arrive; your priority is your safety and a phone call to (914) 530-9723.
Schedule Your Storm & Disaster Restoration Service in Long Island City Today
Call (914) 530-9723 now for a free, documented assessment. A live person will answer, gather your details, and dispatch the nearest crew. You’ll receive a written price before any work begins, a photo record on every visit, and the 365-Day Done Right Promise backed by The Haven Standard. No voicemail, no scope creep, no surprises.
Written by Alicia Brennan, Owner at Back to Dry Restoration, serving Long Island City since 2011.






Before
After
Before
After